DIMA developed a complete new range of selective conformal coating
systems.
These systems range from a complete set of dispensing valves up to motion systems that will provide the most consistent, reliable and cost effective way to coat a PCB.
There are different dispense valves for low-, medium- and high viscosity fluids.
Furthermore DIMA developed an unique spray valve.
The extended spray nozzle of this valve has a very slim design that will enable spraying in between high components.
The valve controls are integrated into the DIMA motion systems, or can be ordered seperately.
The range of motion systems start with a bench top solution, but also consists of stand-alone or fully Smema compatible in-line machine. All the DIMA motion systems are utilised with a camera for easy programming.
Depending on the type of motion system DIMA will have several options
available:
- A 4th and 5th motion axis for dispensing in corners and underneath components
- The possibility to mount up to 4 different dispensing valves per machine
- An automatic fiducial recognition and correction system
- An automatic needle height and XY-offset detection system
- Off-line programming software.
HC Series:
In the HC`series we have 2 models: the HC-100
and the HC-200
.
The HC-100 is a 3 axis robot and the HC-200 is a 4 axis robot.
The robots can handle different tools: the tool can be either a dispense valve, spray valve or a gripper.
Tools and valves can easily be configured off-line and placed onto the revolver head as a complete module.
Both types are offered as a batch or in-line machine. Machines can be upgraded in the field.
For the batch machines there is a variety of clamping systems as well as for the in-line machines.
All units have the unique DIMASOFT® user interface that makes programming a board a simple operation.
All machines are standard equipped with a CCD camera. An automatic fiducial alignment software is available as an option.
8 DIFFERENT VALVE TYPES:
- DD-5100: Rotary valve for dispensing medium viscosity materials
- DD-5110: Diaphragm valve for low to medium viscose liquids
- DD-5120: Mini spool valve for medium to high viscose liquids
- DD-5130: Stainless front closing high pressure valve low to medium volume
- DD-5131: Stainless front closing high pressure valve medium volume
- DD-5132: Stainless front closing high pressure valve medium to high volume
- DD-5140: Spray valve with long spray cap, round beam (patent pending)
- DD-5141: Spray valve wide spray cap, flat beam
< back
